Starburst are absolutely delicious. Definitely among my top 5 favorite candies. One thing I love about Starburst Lei's is that you can mix up the pattern to make it your own.
In the tutorial below I grouped mine by two's but feel free to get creative. Group them by three's, four's, five's, or make one long string of Starbursts and tie it at the end. Just make it your own.
Watch the video below or keep on scrolling to see step by step pictures.
Step 1: Materials
You only need three things to make this lei:
- Cellophane Wrap
Step 2: Roll Out Saran Wrap
The cellophane wrap I'm using is 22 inches in length so I will be using two strips of cellophane wrap to make a lei that's about 40 inches in diameter. You can use saran wrap instead but I've found that cellophane is easier to work with. Cut your cellophane to be about 5 inches wide leaving you with a piece that's 22" by 5".
Step 3: Lay Out Starbursts and Roll Up
Lay out your Starbursts in a row, grouping by two's. Leave about an inch in between each group to leave room to tie your ribbon. Make sure the row is towards the bottom of the cellophane leaving just enough room to fold over the cellophane.
After you've folded the cellophane over the Starbursts grab the groups of Starbursts on either end and roll the entire thing up until you've used up all the cellophane.
Step 4: Tie The Ribbon Around the Cellophane
Cut your ribbon to be about 9 inches in length. This will give you plenty of length to tie a not and curl the ribbon. Slide each strip of ribbon under the cellophane in the space you've left between each group of Starbursts. Tie a simple knot to hold the cellophane together.
Step 5: Curl the Ribbon
The next step is to curl the ribbon using your scissors. If you've never curled ribbon check out the handy video below to learn how.
Step 6: Repeat Steps 2-5 to make the other half of your Starburst Lei
Step 7: Connect the Two halves
The other upside of using cellophane is when it comes to connecting the two halves. Simply squish one end of the cellophane and slide it inside the other half of the cellophane.
Then tie a square knot here so that the two ends don't come apart. It's important that these two knots are tied tight so that the lei doesn't break apart.
The last thing to do is curl the last two strips of ribbon you just tied.
Now you've completed your delicious Starburst Lei. The last thing you need to do is give your lei away to someone special in your life! If you run into any snags or need help just let me know in the comments below.
Ready to make another lei? Check out some of our other popular tutorials below: